| Maximum
size of work accommodated (At a rated grinding wheel diameter) |
|
| Without
magnetic chuck: |
|
| Length |
63” |
| Width |
16” |
| Height |
16” |
| With
magnetic chuck: |
|
| Length |
63” |
| Width |
16” |
| Height |
11” |
| Minimum
size of work held on magnetic chuck |
|
| Length |
2” |
| Width |
1.6” |
| Height |
0.7” |
| Maximum
mass of work machined |
1,320
Lbs. |
| Minimum
distance from spindle axis to table |
8” |
| Maximum
distance from spindle axis to table |
25” |
| Range of
table traverse speed infinitely variable |
2 To 35
M/MIN |
| Grinding
speed with reference to maximum wheel diameter |
34.4
M/SEC |
| Column
cross travel |
17” |
| Speed of
column cross traverse in rapid traverse minimum |
1.2
M/SEC |
| Speed of
column cross traverse during wheel dressing |
0.150
M/SEC |
| Range of
column intermittent cross feed per table stroke infinitely variable |
0.04”-2.3”/Stroke |
| Wheelhead
vertical travel maximum |
16” |
| Wheelhead
vertical travel per dial division |
0.002
MM |
| Wheelhead
vertical travel per dial revolution |
0.2 MM |
| Wheelhead
vertical travel with inching feed |
0.002-0.128
MM |
| Wheelhead
rapid vertical traverse |
200+10%
MM/MIN |
| Minimum
emergency rapid retraction of wheelhead |
1.0 MM |
| Dimensions (L x W x H) |
234" x 104" x 105" |
| Mass
Less hydraulic power unit, coolant unit, and electric cabinet |
15,400
LBS. |
| Mass With
hydraulic power unit, coolant unit, and electric cabinet |
17,600
LBS. |
| Electrics |
380/3
PHASE |
| Grinding
wheel drive (Approx. 15 HP) |
11 KW |
| Drive of
hydraulic system pumps (5 HP) |
4 KW |
| Year |
1994 |
