|
|
New fryer cnc 3 axis rigid head mill
mb-r Series |
 |
The Fryer MB “R” Series is the perfect mill for jobshop and toolroom applications. Equipped with a rigid spindle and optional tool changer, this machine is capable of single or multi part production. The user-friendly control allows fast and efficient shop floor programming. Rigid box way construction and heavy duty Meehanite castings provide high performance cutting capabilities.
complete with :
Anilam-Fryer Touch 3000 ™ CNC Control
*Model MB-10R shown.
|
| |
MB-10R |
MB-14R |
MB-15R |
| X Travel |
32" |
40" |
50" |
| Y Travel |
17" |
20" |
25" |
| Z Travel |
19" |
21" |
24" |
| Table load |
2000 lbs. |
2450 lbs. |
2950 lbs. |
| Table size |
14" x 50" |
16" x 54 " |
17" x 63" |
| T-slots (No./width) |
3 / .630" |
3 / .630" |
3 / .630" |
| Table top to floor |
31" |
33" |
36" |
| Spindle motor |
12 HP |
15 HP |
| Spindle speed |
6000 RPM |
| Tool type |
CAT-40 (BT-40 Optional) |
| Spindle nose to table (Max-Min) |
23" - 4" |
26" - 4" |
28" - 4" |
| Spindle center to column |
17.5" |
20" |
25" |
| Tool storage capacity |
12 |
| Positioning accuracy |
+/-0.0002" |
| Rapid traverse |
400 IPM |
| Cutting feed rate |
0.001 - 300 IPM |
| Coolant capacity |
15 Gallons |
| Power |
30 AMP 208-240 VAC 3 phase and 110 VAC line for control |
| Optional Power |
15 AMP 400-480 VAC 3 phase and 110 VAC line for control |
| Operating dimensions |
103"x67"x98" |
113"x76"x98" |
160"x82"x105" |
| Weight |
5000 lbs. |
7000 lbs. |
9000 lbs. |
CONDITIONS:
Prices: |
Prices are Net, all taxes extra. Subject to change. |
All Prices: |
FOB Pyramid, Calgary, Alberta. |
Terms: |
30% Deposit is Required Upon Placement of order. Balance is Due Prior to Loading. |
Warranty: |
NEW EQUIPMENT: 1 year Parts & Labour, travel & accommodations extra at cost. All electrics warranted by manufacturer. All parts are FOB Builder's Factory unless otherwise specified. All shipments are by ground transport. Fuses, wipers, and other normal wear items are not covered under this warranty. |
|
|
|
