|
|
New CHALLENGER® flywheel grinder
Model #fsg-24 |
| |
features:
-
Grinds most flywheels floor to floor in less than 5 minutes
-
24" diameter capacity, grinds from small import to large
transport trucks
-
Standard tooling package handles most flywheels-optional adapters
are available
-
15" diameter turntable is driven by shaftmounted, cast iron
gearbox/motor combination, no belts or chains, maintenance free
-
Critical wear areas pressure lubricated with front mounted one
shot lubricator
-
Turntable has perimeter support bearing to eliminate turntable
deflection and vibration under heavy grinding pressures
-
2' x 3' footprint takes up little shop space
|
| Rotary table diameter |
15" |
| Max. grinding diameter |
24" |
| Vertical travel of grinding wheel |
8-1/2" |
| Standard grinding wheel stones (diameters) |
3", 4" & 6" |
| Grinding motor speed |
3500 RPM |
| Grinding motor power |
5 HP |
| Power |
230v/3 phase |
|
(single phase optional) |
| Dimensions (W x L x H) |
32" x 37" x 70" |
| Weight (approx.) |
1200 lbs. |
CONDITIONS:
Prices: |
Prices are Net, all taxes extra. Subject to change. |
All Prices: |
FOB Pyramid, Calgary, Alberta. |
Terms: |
30% Deposit is Required Upon Placement of order. Balance is Due Prior to Loading. |
Warranty: |
NEW EQUIPMENT: 1 year Parts & Labour, travel & accommodations extra at cost. All electrics warranted by manufacturer. All parts are FOB Builder's Factory unless otherwise specified. All shipments are by ground transport. Fuses, wipers, and other normal wear items are not covered under this warranty. |
|
|
|
