Pyramid Machine Tools can fill all your equipment requirements.
If you require a machine not listed below please contact us.
*Pyramid Machine Tools Inc. is a proud distributor of quality NEW and USED machine tools. While we endeavor to provide our customers with accurate specifications and prices in all our advertising, a constantly changing market does not always allow this to happen. Please call for a complete and up to date quotation.
| Make | Model | Description | ||
| Challenger® | UE-712-SG | 7" round, 7" x 12" rectangular, 4 blade speeds | ||
| Challenger® | UE-916-A | 9" round, 9" x 16" rectangular, 4 blade speeds | ||
| Challenger® | BS-250-AS | 10" x 17" 4 blade speeds, 2 HP motor | ||
| Challenger® | Vertical | 17-15/16" throat depth, 23-1/2" x 19-1/2" table | ||
| Challenger® | FHBS-1318S | 13" round, 13" x 18" rectangular, swivel | ||
| Challenger® | SBS-330NAA | 13" round, 12" square, variable speed | ||
| Challenger® | FHBS-330SSAV | 13" round, 13" x 19" rectangular | ||
| Bomar | 320.250 DGS | Ergonomic, manual 10" round @ 90 degrees | ||
| Bomar | 510.320 GHV | Economic, semi-auto, 13.5" round | ||
| Bomar | 510.330 GH | Individual, semi-auto, 13" round @ 90 degrees | ||
| Bomar | 510.330 GA | Individual, fully automatic, 13" round | ||
| Bomar | 510.330 GA | Traverse, fully automatic, 10" round @ 60 degrees | ||
BENDERS
| Make | Model | Description | ||
| Baileigh | 100 | Manual Rotary Draw Bender, 1" capacity mild steel sch. 40 | ||
| Baileigh | 150 | Hydraulic Rotary Draw Bender, 2" capacity mild steel sch. 40 | ||
| Baileigh | 300-PRG | Programmable Bender, 2" capacity mild steel sch. 40 | ||
| Baileigh | R-M10 | Roll Bender, 2" flat bar easy way, manual | ||
| Baileigh | R-M40 | Roll Bender, 2-1/4" flat bar easy way, horizontal/vertical, variable | ||
| Baileigh | R-M55 | Roll Bender, 3 " flat bar easy way, 2 powered rolls,variable | ||
| Baileigh | R-H55 | Roll Bender, 3 driven rolls, 2" square tube | ||
| Baileigh offers a wide range of benders. Call for more information. | ||||
| Hossfeld | #2 | c/w part #46000, #46001, #46002 | ||
BORING MILLS
| Make | Model | Description | ||
| There are no boring mills in inventory at this time. Call with your requirements | ||||
BRAKES
| Make | Model | Description | ||
| Durma | E Series | Synchro hydraulic brakes, 3-Axis & 4-Axis | ||
| Durma | S Series | Synchro hydraulic brakes, 4-Axis + | ||
CNC Lathes
| Make | Model | Description | ||
| Challenger® | FEL-1640ENC | 2 Axis Anilam 4200T Control, 10 HP Inverter | ||
| Challenger® | FEL-2480ENC | 24" x 80" ctrs, 4-1/8" bore, D1-8 spindle, 20 HP | ||
| Acra | CL-320BX2000 | FANUC OT-I Control, 30 HP, 5.1" bore | ||
| Fryer | ET Series | Easy Turn Combination CNC lathes | ||
CNC Machining centers
| Make | Model | Description | ||
| Acra | AHSM-1000L | 40" X, 24" Y, 24" Z, 24 ATC | ||
| Fryer | MC-E Series | Economy Machining Centers | ||
| Fryer | MC-P Series | High Performance Machining Centers | ||
| Fryer | VB Series | Open Machining Centers | ||
CNC Milling Machines
| Make | Model | Description | ||
| Challenger® | DM-4VS | 39.4" X, 19.7" Y, 19.7" Z, 16" x 60" Table, Anilam 5300 control | ||
| Fryer | MB-Q Series | Toolroom Bed Mills with Manual Quill | ||
| Fryer | MB-R Series | Toolroom Bed Mills with Rigid Spindle | ||
Cold Cut and Abrasive Saws
| Make | Model | Description | ||
| Challenger® | DCS-14 | Abrasive saw, 5-3/16" round, 14" wheel diameter, 58 tooth blade | ||
| Challenger® | SCS-350D | Coldcut saw, 1.96 " round at 45°, 1.77" x 1.77" square at 45° | ||
Column Drills
| Make | Model | Description | ||
| Challenger® | MDP-435 | 1-1/4" capacity in steel, 1-1/2" in capacity in cast | ||
| Challenger® | S-600B | 1-3/8" capacity in steel, MT #4 taper, 8 speeds | ||
| Challenger® | Z5050A | 2" capacity in steel, MT #4, Auto feed & tapping | ||
| Erlo | TCA-45 | 1-3/4" capacity in steel, MT #4 taper, 9 speeds | ||
Grinders
| Make | Model | Description | ||
| Challenger® | CT457 | Tool & Cutter, 16" centers, 17-3/4" long travel | ||
| Challenger® | ASG-1632HS | 16" x 32" working surface, 18"x35" max table travel | ||
Gun Drills
| Make | Model | Description | ||
| There are no gun drills in inventory at this time. | ||||
Ironworkers
| Make | Model | Description | ||
| Challenger® | HIW-40 | Capacity 40 ton, 6-7/8" throat, 4 HP motor | ||
| Challenger® | HIW-45 | Capacity 45 ton, 6-7/8" throat, 4 HP motor | ||
| Challenger® | HIW-60 | Capacity 60 ton, 8-3/4" throat, 5.5 HP motor | ||
| Challenger® | HIW-80 | Capacity 80 ton, 12" throat, 10 HP motor | ||
| Durma | IW55BTD | Capacity 60.5 punching, 19.68" throat depth | ||
| Durma | IW80BTD | Capacity 88 punching, 20.07" throat depth | ||
| Durma | IW110BTD | Capacity 121 punching, 24.01" throat depth | ||
| Uni-Hydro | 45-14 | Capacity 45 tons, 6" throat, 3 HP motor | ||
Lapping Machines
| Make | Model | Description | ||
| Lapper | 20 | 20" lapping machine | ||
| Lapper | 24 | 1-1/8"crank shaft dia,24"lapping plate, 7/16" stroke | ||
| Lapper | 30 | 30" lapping machine | ||
Lathes
| Make | Model | Description | ||
| Challenger® | Fel-1440GZJ | 14" x 40" center, D1-4, 8 speeds, 3 HP | ||
| Challenger® | FEL-1660GNX | 16" x 60" center, 3.14" bore, 42-1800 RPM | ||
| Challenger® | FEL-1660G | 16" x 60" center, D1-6 spindle, 12 speeds, 5 HP | ||
| Challenger® | FEL-2080GNX | 20" x 80" center, 3.18" bore, D1-8 spindle, 12 speeds | ||
| Challenger® | FEL-2180G | 21" x 80" center, D1-8 spindle, 3-3/16" spindle bore | ||
| Challenger® | FEL2680GZJ | 26" swing x 80" / 120" centers, 4-1/8" bore, D1-11 spindle | ||
| Challenger® | FCH-1700 | 17" swing x 35"/ 60"/ 90"/ 120"/ 160" centers | ||
| Challenger® | FCH-2200 | 22" swing x 35"/ 60"/ 90"/ 120"/ 160" centers | ||
| Challenger® | FCH-2600 | 26" swing x 35"/ 60"/ 90"/ 120"/ 160" centers | ||
| Challenger® | FCH-3000 | 30" swing x 35"/ 60"/ 90"/ 120"/ 160" centers | ||
| Birmingham | DL-1880 | 18" x 80" center, 3-3/16" bore, 16-1600 RPM | ||
| Birmingham | DL-2280 | 22" x 80" center, 3-9/64" bore, 16-1600 RPM | ||
| Birmingham | DL-26120 | 26" x 120" center, 4-1/8" spindle bore, 15HP | ||
| Birmingham | YCL-2280 | 22" x 80" center, 31" swing in gap, 10 HP | ||
| Lion | 20M | 20" x 40"/60"/80"/120" centers, 19-2400 RPM | ||
| Lion | 20MS3 | 20" x 40"/60"/80"/120" centers, 3.2" bore | ||
| Lion | 20MS4 | 20" x 40"/60"/80"/120" centers, 4-1/16" bore | ||
| Lion | 25-MS | 25" x 60"/80"/120"/160" centers, 4-1/16" bore | ||
| Lion | 28-MS | 28" x 60"/80"/120"/160" centers, 10-1500 RPM | ||
| Lion | 31-MS | 31" x 80"/120"/200" centers, 5-1/4" bore | ||
| Lion | 31-OF | 31" x 120"/170"/200", hollow spindle, 10-1/8" bore | ||
Mill Drills
| Make | Model | Description | ||
| Challenger® | RF-31 | R8 taper, 5-1/8" spindle stroke, 105-2500 RPM. | ||
| Challenger® | RF-45 | R-8 taper, 9-1/2" x 32" table, 20-1/2" swing | ||
Milling Machines
| Make | Model | Description | ||
| Challenger® | FM-2V | 9" x 42" table, 34-1/2" long, 12" cross, 16" vertical | ||
| Challenger® | FM-3V | 10" x 54" table, 34" long, 15-3/8" cross, 15" vert | ||
| Challenger® | FM-4V | 10" x 54" table, 34" long, 15-3/4" cross, 16-7/8" vert | ||
| Challenger® | FM-5V | 12-1/2" x 58" table, 38" long, 15-1/2" cross | ||
Miscellaneous
| Make | Model | Description | ||
| Check the Used Equipment List - Miscellanous or click here. | ||||
Punch Presses
| Make | Model | Description | ||
| Azimuth | 8-1P | 8 ton capacity, 1-1/2" stroke, 5-1/2" throat depth | ||
| Azimuth offers a wide range of punch presses. Call for more info. | ||||
Radial Drills
| Make | Model | Description | ||
| Challenger® | RF-35 | 20" x 22" table, 5-1/8" stroke, MT #3 spindle taper | ||
| Challenger® | FRD-750S/900/1100 | 1-1/2" to 2" drilling capacity, MT #4 taper | ||
| Challenger® | FRD-1300H/1600H | 2-1/8" drilling capacity, MT #5 taper | ||
Rolls
| Make | Model | Description | ||
| Eagle | CP-20 | Bench model, 2 driven rolls, 10'/min rolling speed | ||
| Eagle | CP30-PR | Manual bend adjust, 2 driven rolls, 10.5'/min speed | ||
| Eagle | CP40-M | Manual bend adjust, 2 lower knurled driving rolls | ||
| Eagle | CP40-H | Hydraulic bend adjust, 3 driven rolls, 14'/min speed | ||
| Eagle | CP60-H | Hydraulic bend adjust, 3 driven rolls | ||
| Eagle | CPD-80 | Hydraulic bend adjust, double pinch, 3 driven rolls | ||
| Eagle | CPS-50 | Hydraulic, 3 driven rolls, 16'/m rolling speed | ||
Shapers & Slotters
| Make | Model | Description | ||
| There are no new shapers or slotters in inventory at this time. | ||||
Shears
| Make | Model | Description | ||
| Durma | SB Series | Swing beam shears, reliable & accurate | ||
| Durma | ES Series | Hydraulic shears, extremely rigid | ||
| Durma | VS Series | Hydraulic, variable rake angle shear | ||
Sheet Metal Equipment
| Make | Model | Description | ||
| Challenger® | Brakes | Box & Pan Brakes Bench Type | ||
| Challenger® | Brakes | Box & Pan Brakes Floor Type | ||
| Challenger® | Brakes | Hand Brakes Bench Type | ||
| Challenger® | Brakes | Hand Brakes Floor Type | ||
| Challenger® | Shears | Hydraulic Power Shears | ||
| Challenger® | Shears | Foot Shears | ||
| Challenger® | PN-100 | Pipe Notcher, 3/4" to 3" capacity, 5 hp motor | ||
| Challenger® | FHB-412-6 | Hydraulic 90 Degree Corner Notcher | ||
| Challenger® | FN-M616 | Hand Notcher | ||
| Challenger® | FR-P5016 | Power Rolls, 50" Working length | ||
| Challenger® | Rolls | Slip Rolls | ||
| Challenger® | Bar Folders | Bar Folders | ||
| Challenger® | Lockformer | Lockformer | ||
| Challenger® | FR-M220 | Multi-roll | ||
| Baileigh-RMD | TN-800 | Tube & Pipe Notcher, Min OD 0.50" | ||
| Baileigh-RMD | TN-900 | Tube & Pipe Notcher, Min OD 0.75" | ||
Threaders
| Make | Model | Description | ||
| There are no new threaders in inventory at this time. | ||||
Welders/Spot Welders
| Make | Model | Description | ||
| There are no new welders or spot welders in inventory at this time. See Used Equipment. | ||||
© 2006 Pyramid Machine Tools